|
Product ID: FCM-65
PE Monofilament Making Machine
This extrusion line is for making monofilament yarn, it can be using for PE & PP raw material, it was for offering the round yarn for match the SR-R & DR-R knitting machine.
The winder was special design for match the knitting machine, it belong to direct type, it can wind into the necessary mono yarn direct into the beam, it don't need to using the warping machine, it can save one working process & the plant occupation. |
|
Specifications:
- Remarks
- Manufacturer reserve the right to change the specifications without notice.
|
| Model |
FCM-65 |
FCM-55 |
| Extruder-Screw Dia. |
65mm Dia. |
55mm Dia. |
| Extruder-Screw L/D |
26:1 |
28:1 |
| Extruder-Screw Material |
SCM 4 |
SCM 4 |
| Extruder-Cylinder Material |
SACM 1 |
SACM 1 |
| Extruder-Heater Capacity |
12 KW |
12 KW |
| Extruder-Driving Motor |
30 HP VS Motor |
25 HP VS Motor |
| Extruder-Hopper Loader |
1 set |
1 set |
| Control Panel-Temperature Control |
4 Points |
4 Points |
| Cooling Device-Cooling Type |
Water Circulation |
Water Circulation |
| Take-off unit: A-Type |
5 pcs. of Roller |
5 pcs. of Roller |
| Take-off unit: A-Driving Motor |
2 HP VS Motor |
2 HP VS Motor |
| Extension Device-Type |
Hot Water Trough |
Hot Water Trough |
| Extension Device-Heater Capacity |
12 KW |
12 KW |
| Take-off unit: B-Type |
7 pcs. of Roller |
7 pcs. of Roller |
| Take-off unit: B-Driving Motor |
5 HP VS Motor |
5 HP VS Motor |
| Annealing Device-Type |
Hot Water Trough |
- |
| Annealing Device-Heater Capacity |
6 KW |
- |
| Take-off unit: C-Type |
7pcs. of Roller |
- |
| Take-off unit: Driving Motor |
3 HP VS Motor |
- |
| Winder-Type |
Direct |
Direct |
| Winder-Number of Beam |
2 pcs. of Beam |
2 pcs. of Beam |
| Winder-Driving Motor |
1kgm Torque Motor x 2 |
1kgm Torque Motor x 2 |
| Dimension L x W x H (cm) |
14,630 x 1,755 x 2,900 |
10,490 x 1,655 x 2,000 |
|
|
Ordering information:
-
Minimum Order: Negotiable
-
TEL: 886-3-4717824 / 4717825 / 4717453
-
FAX: 886-3-4717702 / 4580170
|
|
|
